FT Switch Panel und Controller

FEATURES

SwitchPanel Mini is a compact and multicolor backlight button panel that communicates with the PowerFT line ECUs (FT450, FT500, FT500LITE, FT550 and FT600) through FTCAN 2.0.

Using SwitchPanel-4 Mini, SwitchPanel-5 Mini and SwitchPanel-8 Mini will make your build look even better. It's compact size allows it to be installed in any space. It has versions of 4, 5 and 8 buttons. The identification of each button is done through several predefined labels that come with the product, in addition to allowing you to create your own label using the blank labels. In this way, each button will be very well identified, especially for the colored LED lighting that varies according to the programmed function.

Another benefit of using the SwitchPanel Mini is that it saves up inputs of the PowerFT ECUs and allows you to expand your build without having to use PowerFT ECUs with more inputs.

SwitchPanel Mini is compatible with all the features present in the PowerFT line ECUs. All buttons can be configured, such as 2-step, Air conditioning, Boost +, Engine start button, switch dashboard screen, etc. Switch type functions are also supported such as the day / night mode button, Burnout, Progressive Nitrous, internal datalogger, etc.

The SwitchPanel Mini has well-spaced buttons with a clear tactile perception and is perfect for use with gloves. It has IP67 protection against water and dust (complete protection against dust and immersion up to 1 meter for up to 1 hour). The case has screws on the back, which allows easy and discreet installation and can be integrated into the dashboard, which makes its design even more professional.

TECHNICAL DESCRIPTION

Supply Voltage: 12-24Vdc

Standby Current: <50mA

Communication BUS: FTCAN 2.0

CAN connector: 1 Molex male, 1 Molex female

Switch Life: Million operations

Material: Silicone rubber with polyurethane hardcoat

Mounting Studs: #10-32

Ingress protection Rating: IP67/NEMA6

Dimensions: 2.70 x 2.70 x 0.82 in

CONTENTS OF PACKAGING

1 SwitchPanel-4 Mini

1 Harness for installation

1 Operation and installation guide

1 Mounting kit (2x #10-32 nuts & washers)

1 SwitchPanel label sheet

FEATURES

SwitchPanel Mini is a compact and multicolor backlight button panel that communicates with the PowerFT line ECUs (FT450, FT500, FT500LITE, FT550 and FT600) through FTCAN 2.0.

Using SwitchPanel-4 Mini, SwitchPanel-5 Mini and SwitchPanel-8 Mini will make your build look even better. It's compact size allows it to be installed in any space. It has versions of 4, 5 and 8 buttons. The identification of each button is done through several predefined labels that come with the product, in addition to allowing you to create your own label using the blank labels. In this way, each button will be very well identified, especially for the colored LED lighting that varies according to the programmed function.

Another benefit of using the SwitchPanel Mini is that it saves up inputs of the PowerFT ECUs and allows you to expand your build without having to use PowerFT ECUs with more inputs.

SwitchPanel Mini is compatible with all the features present in the PowerFT line ECUs. All buttons can be configured, such as 2-step, Air conditioning, Boost +, Engine start button, switch dashboard screen, etc. Switch type functions are also supported such as the day / night mode button, Burnout, Progressive Nitrous, internal datalogger, etc.

The SwitchPanel Mini has well-spaced buttons with a clear tactile perception and is perfect for use with gloves. It has IP67 protection against water and dust (complete protection against dust and immersion up to 1 meter for up to 1 hour). The case has screws on the back, which allows easy and discreet installation and can be integrated into the dashboard, which makes its design even more professional.

TECHNICAL DESCRIPTION

Supply Voltage: 12-24Vdc

Standby Current: <50mA

Communication BUS: FTCAN 2.0

CAN connector: 1 Molex male, 1 Molex female

Switch Life: million operations

Material: Silicone rubber with polyurethane hardcoat

Mounting Studs: #10-32 (3/16”x32)

Ingress protection Rating: IP67/NEMA6

Dimensions: 6.12 x 1.56 x 0.82 in

CONTENTS OF PACKAGING

1 SwitchPanel-5 Mini

1 Harness for installation

1 Operation and installation guide

1 Mounting kit (2x #10-32 nuts & washers)

1 SwitchPanel label sheet

FEATURES

SwitchPanel Mini is a compact and multicolor backlight button panel that communicates with the PowerFT line ECUs (FT450, FT500, FT500LITE, FT550 and FT600) through FTCAN 2.0.

Using SwitchPanel-4 Mini, SwitchPanel-5 Mini and SwitchPanel-8 Mini will make your build look even better. It's compact size allows it to be installed in any space. It has versions of 4, 5 and 8 buttons. The identification of each button is done through several predefined labels that come with the product, in addition to allowing you to create your own label using the blank labels. In this way, each button will be very well identified, especially for the colored LED lighting that varies according to the programmed function.

Another benefit of using the SwitchPanel Mini is that it saves up inputs of the PowerFT ECUs and allows you to expand your build without having to use PowerFT ECUs with more inputs.

SwitchPanel Mini is compatible with all the features present in the PowerFT line ECUs. All buttons can be configured, such as 2-step, Air conditioning, Boost +, Engine start button, switch dashboard screen, etc. Switch type functions are also supported such as the day / night mode button, Burnout, Progressive Nitrous, internal datalogger, etc.

The SwitchPanel Mini has well-spaced buttons with a clear tactile perception and is perfect for use with gloves. It has IP67 protection against water and dust (complete protection against dust and immersion up to 1 meter for up to 1 hour). The case has screws on the back, which allows easy and discreet installation and can be integrated into the dashboard, which makes its design even more professional.

TECHNICAL DESCRIPTION

Supply Voltage: 12-24Vdc

Standby Current: <50mA

Communication BUS: FTCAN 2.0

CAN connector: 1 Molex male, 1 Molex female

Switch Life: million operations

Material: Silicone rubber with polyurethane hardcoat

Mounting Studs: #10-32 (3/16”x32)

Ingress protection Rating: IP67/NEMA6

Dimensions: 4.98 x 2.70 x 0.82 in

CONTENTS OF PACKAGING

1 SwitchPanel-8 Mini

1 Harness for installation

1 operation and installation guide

1 mounting kit (2x #10-32 nuts & washers)

1 SwitchPanel label sheet

FEATURES

SwitchPanel-8 is a button panel with multicolor backlight that communicates with the PowerFT line ECUs (FT600 / FT550 / FT500 / FT500LITE / FT450) through FTCAN 2.0.

Using SwitchPanel-8, your project will look even better. Each button is identified through several predefined stickers that are included with the product; blank stickers are also included so you can make your own IDs. Thus, each button will be very well identified in particular by the multicolor LED backlight that varies according to the programmed function.

Another benefit of using SwitchPanel-8 is that you can reallocate up to 8 PowerFT ECU inputs to extra sensors or functions, allowing you to expand your project without having to purchase more devices with more inputs.

SwitchPanel-8 is compatible with all the features in the PowerFT V3.30. All buttons from the ECU can be selected such as 2-step, Air conditioning, Boost +, Engine Startup, dashboard screen switch, etc. The switch functions are also compatible such as Day / night mode switch, Burnout, Progressive Nitrous, datalogger, etc. In addition to compatibility with the existing features, the V3.30 version of the PowerFT ECUs added map switching through buttons, single-button or a button for each map.

The SwitchPanel-8 has well spaced buttons with clear touch perception and is perfect for use with gloves. It has IP67 protection against water and dust (complete protection against dust and immersion up to 1 meter for up to 1 hour).

The cabinet has screws in the back, allowing an easy and discreet installation into the dashboard, making your project even more professional.

TECHNICAL DESCRIPTION

Electrical Specifications

Supply Voltage: 12-24Vdc

Standby Current: <50mA

Communication BUS: FTCAN 2.0

Mechanical Specifications

CAN connector: 1 Molex male, 1 Molex female

Switch Life: million operations

Material: Silicone rubber with polyurethane hardcoat

Mounting Studs: #10-32

Ingress protection Rating: IP67/NEMA6

Dimensions:

(5.88 x 4.10 x 0.88)"

Weight: 11 oz

Input Expander Module for PowerFT line (FT500 / FT500LITE / FT450 / FT550 / FT550LITE / FT600), with 20 inputs for sensor readings such as (pressure, flow, temperatures, position and activation of functions using keys or buttons), and 4 inputs RPM reading and speed. Full integration with FTManager software and communication via the CAN network. With a simple and fast configuration through an interface already known to all users of FuelTech products.

Specifications:

20 analog inputs

4 differential inputs

Communication via CAN Network

34-Way automotive connector

Dimensions:

Module: 4.53 x 3.54 x 1.77 in

Packaging: 8.78 x 6.38 x 2.36 in

Contents of packaging:

1 Input Expander Module

1 installation and operation manual 

1 sticker

1 cushion kit

Warranty: 

Worldwide: 1 year

FEATURES

16x2 characters OLED display and buttons that allow programming directly on the unit. No computer needed

Active boost control through wastegate pressure management

Up to 6 stages of Boost and 1 launch stage

For drag racing, circuit and street cars

Dual Boost Ramp Control per Stage

Burnout mode (fixed boost for burnout)

2 control solenoids included 

TECHNICAL DESCRIPTION

Scramble and reduce inputs to instantly boost increase or decrease pressure

Pivot and final pressure per stage

Boost line or CO2 reservoir compatible (for quick and precise control)

3 modes of adjustment:

- Time and pressure

- Time and Ramp

- Ramp and Pressure

3 internal memory files

87psi Integrated Pressure Sensor with 0,145psi resolution

Security password

CAN connection for firmware update*

Can only be used with solenoids provided by FuelTech. May not work properly with other solenoids

Dimensions: 140mm x 80mm x 30mm

w/ 10ft blank harness

*FuelTech USB-CAN Converter needed – sold separately

CONTENTS OF PACKAGING

1 BoostController2

1 Operation and installation guide

1 6ft Nylon hose for MAP Sensor

1 CAN CAN harness

1 6ft BoostController harness

1 Smart Clip Bracket & Hardware

2 30 BAR 12V 5W control solenoids

1 Promotional kit (including a pen, a keychain and a FuelTech black carbon fiber sticker)